Yamaha MT-09 Vibration Problem

Question

My bike has a little bit virbration when the speed of engine is about 4000rpm.Does anyone have same situation?is it normal?or that is just torque change?

Connor 6 years 14 Answers 2896 views 0

Answers ( 14 )

    0

    mine 5k to 6k rpm

    0

    I have it to. Not much, but if stay there for a while I still noticed my fingers gets numb.

      0

      I think maybe it has some thing wrong,and I have idea to do synchronization for TB

      0

      Maybe so. Can’t remember, but I don’t think it was like this in the beginning ?

    0

    Clean the chain, warm it up riding 5 minutes, lube it and left overnight. You’ll be surprised

    0

    Clean and lubricate the chain, but and most important, set the chain slack at 25 to 30mm.

    0

    The chain is noir my issue. Only feel this from like 3800-4100 rpm. Over that is not there. Like the vibrations in a lawnmower. Deftly the engine.

      0

      Ballance the throttle bodies.

      0

      Lennie Pro, yep 3800~4100 rpm

      0

      David cowle, YEP, I wonna do TBS

      0

      Nice. Don’t no when I got time to fix it. Please tell me if it helps when/if you get ours done.

      0

      Yes it helps, but take note, most engines have a slight vibration at one point through the Rev range.

      0

      Jupp. Every engine does more or less. But it feels like this issue has come up now after some times riding. My bike is a 2015. And has like 8500km on it when I bought it. Have no done like 12500km. So I have riding like 4000km on like little more then 2 month I been tithe owner ?. But in the beginning I never had this problem. ?

      0

      If that’s the case, it would more than likely be that the throttle bodies need to be synchronised.

Leave an answer to Lennie Pro

Browse
Browse

Where are Honda motorcycles produced? ( Japan )