This is an OCD Question

Question

Okay, this is an OCD Question. I have been procrastinating wiring up light bar and pods front and rear. Here in lies my conundrum. I REALLY like clean wiring. So I wont run wires in the open if I dont have to. So can I splice as fuse block and 30amp breaker/disconnect (for the winch) into the winch wires going to the battery. Then wire the lights/ dash switches/relays off of this block. This would make all the wiring be up front and not scattered throughout the machine. Thank You in advance.

3 years 0 Answers 509 views 0

Answers ( No )

    0

    I want to find the main power coming into the fuse box and wire a separate fuse block for acc. If I figure that out I’ll post it

    0

    On the z1000 there is a fuse block under the hood. I found a spare fuse that is keyed with the ignition and tapped off that, simple.

    0

    I ran two wires from the battery to a toggle switch to this fuse block! Works awesome plus I have more spots to hook up other shit and have it own fuse

    0

    Connect a relay to the ignition and have your acc source connect to the contact on the relay to feed your fuse block

    0

    im doing the same now but using battery cut off switch so i can kill power to fuse block from second battery

Leave an answer to Jason

Browse
Browse

Where are Honda motorcycles produced? ( Japan )