Hydraulic clutch to a manual clutch on a KTM?

Question

Hello guys,Anybody converted they hydraulic clutch to a manual clutch on a KTM? Thanks.
Ride Safe! 🙂

Connor 6 years 20 Answers 1702 views 0

Answers ( 20 )

    0

    I don’t think that’s even an option.

    0

    I’ve never heard of anyone doing that… If you are having trouble with clutch feel try a Midwest lever. Maybe a good back bleed too

    0

    Why in the world would you want that?

    0

    Why the hell would you want to do that?

    0

    On my 17TE300 I’ve gone up to a 14t for a week of desert riding without clearance issues.

    0

    No

    0

    No sir

    0

    Why lol

    0

    It may be possible to machine the slave enough to get clearance you need

    0

    Well, I’m just over wondering why the hell would anyone want to go backwards

    0

    Not possible

    0

    Funny one…

    0

    My 98-300 Mxc has a mechanical clutch cable. If I use the clutch much during a ride it needs to be adjusted. Not a big deal cuz there’s a star adjuster on the perch, but it must be done. It doesn’t take more than a half turn in either direction to keep the slack correct.

    0

    Non KTM is envious of our soft pull and you want to remove it!!??

    0

    NO!

    0

    I trade bikes ALOT. I’m usually not a KTM guy at all. But I’m in a 300 now. BUT I liked my cable clutches on the kawi as good if not better than the hydraulic set up. And I just had to give $65 for a hydro hose I broke in a get off. I don’t think it would have hurt a cable. But if it did it’s $20 lol. If I was on a 450 it would still be a kawi. I see nothing wrong with a cable.

    0

    Wes Kent Corey Purlee.. read some of these comments..

    0

    Find a left side case for a 96-7 yr 125 SX and hope ur parts fit it .

    0

    No, but I did save a ton of money on my car insurance switching to Geico

    0

Leave an answer to Joey

Browse
Browse

Where are Honda motorcycles produced? ( Japan )