Honda Shadow Wires/Butt Connectors

Question

Alright my Shadow friends…. help! Why could these wires/butt connectors have fried?

Danielle Linn 7 years 21 Answers 1839 views 0

Answers ( 21 )

    0

    an electrical short…

    0

    Not sure, but a friend of mine told me if your regulator/rectifier is bad this could happen.

    0

    Something in the CDI box?

      0

      Should not be. Either stator or voltage regulator

    0

    Rr is that metal heatsink like part lower right of picture

    0

    just guess 3 yellow wires to stato can be pieced in but do not know just common from bad plugs get corode then fry

    0

    That regulator in the picture. Had the same issue and couldn’t keep a charge. New regulator no more issues

    0

    just do a straight wire job .

    0

    yeah looks like the line between stator and rectifier. I’d say RG Hillyard is right

    0

    That’s a common shadow problem. Cut and eliminate the connector. Sure directly and solder. Then check the charging voltage. Anywhere between 12.9v and 14.3v is fine

    0

    Cheap Chinese rectifier, spurious part

    0

    This is very common, remove the plugs and solder them.

    0

    Old and I had the same thing happen to me I replaced the stator and rectifier and solved my charging issue

    0

    Crappy connector job. Ive done it myself and it wasnt a good enough connection. It arced out caught fire and burned them all.

    0

    Common issue with Honda. As stated above, cut the connectors off and wire/solder them together.

    0

    Just went down this road my self but mine ruined the stator and rectifier

    0

    Bad or corroded conection = resistance, resistance = heat, heat melts burns connector and wires, repair wiring check for proper operation components could have been overloaded from the high load of the resistance.

    0

    Regulator rectifier failure can cause this if it’s over charging everything I’ve seen it happen a few times working in a bike shop and had it on my own shadow rectifiers are prone to going many wire melt downs and charging problems lead to rectifiers

    0

    I had One that fried it was my safety switch on the handle bar was grounding out causing it to fry your wires look like they’re coming from the stater the same as mine if that help

    0

    Check your charging system, you got a problem starting that’s putting a load on your wires, but once you’ve got it all figured out you can add new wires with new connectors.

    0

    This is a common problem with an easy fix which even Honda use. The 3 yellow wires from the alternator are thicker than the ones in the loom. This sets up a resistance in the connector block which generates heat, another thing that generates heat is if the connector block is corroded…. Get some 15 amp household electrical connector strip ‘Google it’… cut the wires and fit the connectors to the 3 yellow wires.The 15amp connectors dont get hot…. problem solved.

Leave an answer to Walter Harris

Browse
Browse

Where are Honda motorcycles produced? ( Japan )