Cover off my belt to check it over (cforce 500ho)
Question
Question took the cover off my belt to check it over and I noticed the nut on the left side looks like it is backing off, is it normal for it to look like that or do I need to torque it? Machine is a 2015 cforce 500ho
Answers ( No )
Don’t see it
Hard to really tell from picture but from what I can see it’s fine. I always use blue loctite on mine .
Its not backing off
Ok thanks
My 2019 came like this Also
From what I see it looks fine coming from experience make sure you take it in because it’s expensive if you mess it up
Heck, you are there. Pull them, inspect and clean both then reassemble. Good practice. Just need a spanner, torque wrench..and the specs.
Look like it’s all in good shape to me
Have your dealer check with the manufacturer there were some recalls for those
Looks just like a Z1000 and the factory over check marks still line up. The end of the start does is not flush with the end of the nut. Check torque to be safe.