CForce 800 Emergency Break P Symbol

Question

My little red emergency break P symbol will not go off on my cforce 800, has anyone had this issue?

David 3 years 17 Answers 685 views 0

Answers ( 17 )

    0

    Check your brake fluid or if your parking brake is stuck.

      0

      dumb question but is the parking fluid under the seat?
      Break is not stuck

      0

      I have no idea where it’s located in the quads.

    0

    I believe there’s 2 places for brake fluid. Under the seat, and on the right handlebar. Im not in front of mine, so i can’t confirm that at the moment

    0

    Does it shut off when you set the brake? I had a customers 800 that had a switch that operated in reverse.

      0

      no it does not shut off at all

      0

      unplug the harness at the steering stem and short the wires together.

    0

    heh, typical cf issue – open and close the hand lever tank and it will be ok 🙂

    0

    t’s the button behind the E brake. Mine was stuck as well. It’s the black lever on the right handle bar. When you pull it out to set it it will activate. When you release it it should go off. There’s a tiny switch you will see it wiggle it it will release. Then put di electric grease in there. It’s plastic on plastic and gets stuck no biggie.

      0

      but when I take the break off the break releases it’s just the light Dosent come off

      0

      I know the button is stuck. The e brake is cable controlled the button is electric. I’m not home to take a picture right now. I’ve had the issue a few times.

      0

      I’ve had the same thing happen. Switch sticks in at times

      0

      is it a cold thing? Warm it up

      0

      I don’t think it’s temperature related. Silicone spray or dielectric grease will help

      0

      could you PLEASE take the picture. I cant find it. Tnx in advance

      0

      I’m not near my atv. If you are take a pic of the park brake. I will circle it

    0

    Thanks to everyone who reached out, was able to fix the minor issue today
    little metal piece that the break latch meets was actually sticking. Real easy

Leave an answer to Bo

Browse
Browse

Where are Honda motorcycles produced? ( Japan )