2020 R1 de-Cat

Question

2020 model with de-Cat will it pass the dB test with akro end can?
Brands hatch

Stewart 3 years 21 Answers 1017 views 0

Answers ( 21 )

    0

    For track you mean ? If so I doubt it. I have that set up on mine and it will definitely fail mate

    0

    I had just an akrapovic end can on a 2015 and was on the limit at static

    0

    So if I put original back on with de-cat would I get away with that?

      0

      Stewart, Standard can isn’t actually that good at reducing noise. It’s the de cat that’s cause your problem. Brands is pretty tight for anything other than bigger cans

    0

    I doubt it. Brands is 102 limit

    0

    My 15 with stock can and decat was 116dB, fortunately I was going to Spain and they don’t give a fuk. You need a long can or a baffled de-cat for U.K.

    0

    Thanks guys .
    I may get in touch with seton (Phil) as I know he does a long can .

    0

    You’ll need a 450mm can with a decat link pipe. Simon Cope from Powertech sorted mine. Blew 99db without baffle

    0

    is there any track I could get on with what I have now?

      0

      Stewart, Donington and Cadwell

      0

      Euro circuits

      0

      Anglesey

      0

      Cadwell is 105 but when I had my de-cat ect it was tested there at 112.now have full system and is 101 at cadwell.

    0

    Back in the day 🤣 I knew there was no noise limit days . Have the long gone now 🤣🤣

    0

    Have they long gone . (Sorry ) long shift today

      0

      Stewart, donnington do No noise limit days, few and far between though

    0

    A 400mm black widow silencer is the most cost effective solution.

    0

    Yes if it has the baffle fitted I have the same set up on my 2019 R1 and did brands gp last year it blew just on the limit but had no issues with being 🏴 for noise there were also a few others running the same set up

    0

    Not a chance
    if you do decat it make sure mininum length can is 400 if not 450mm.

    0

    I blew 108db with that set up.

Leave an answer to James

Browse
Browse

Where are Honda motorcycles produced? ( Japan )