2 inch rzr lift off amazon for my 18 Zforce 500
Question
Ordered the 2” rzr lift off amazon for my 18 Zforce 500, my question is whether or not it’s normal for them to be all different sizes.
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Answers ( 19 )
Yes so you can set it up for circle track!
Could it be taller ones for the front and rear and also the driver side be taller to offset the weight of the driver?
Just a thought
Real talk powersports has a video showing installation
Yes. Watch a video how they are installed. You will see why.
Yes they are correct
Blake has alot of videos on cfmoto
They are right.
The tall ones go on the front bottom (a-arm) and the short ones go on rear at the top (frame). Now the taller of the 2 go to the front of the OEM shock brackets.
https://youtu.be/VgcpQHRnfac
Clearance for welds
When I installed my lift kit I cut the tabs off like everyone said and it made it to where they actually needed the tabs
I would like to point out, not being negative but, if there is no support under the seat, will it not sag? The liner under the seat is a plastic.
https://youtu.be/fPY9dFrTLHQ
Yes
I actually cut mine and modified it to give almost 4" of lift
The set i bought didn’t look like that. I would send them back
They are the right ones.
No instructions? Two tall ones in front, shorter of two goes in between the shock mount. Taller one on outside. Angles to the welds.
I posted the video for him people
Yes normal